สร้างความแตกต่างให้กับลูกค้าของเรา
02-136-1770

ธันเดอร์เลเซอร์ ประเทศไทย

troubleshooting troubleshooting
Location:Home > troubleshooting > laser cutter software > How to prepare your files for feeding into the laser program to cut
Image-1

Thunder Laser Video


How to choose a reliable laser cutter

WATCH NOW
▷ How to choose a reliable laser cutter
laser parametes

Thunder Laser Video


Laser Samples Parameters

WATCH NOW
▷ Laser Samples Parameters

How to prepare your files for feeding into the laser program to cut

Release Time:2019/06/01 laser cutter software Browsing Times:107

some trouble of laser cutter

Scenario 1:

If the vector has overlapped paths and it will be cut repeatedly.
Solution
In RDworks, you can use “Delete overlap” tool to delete all overlapped paths, like below.


some trouble of laser cutter

 

Scenario 2:
If you’d to make a rectangle at 30×30mm, however, it becomes 29.9×29.9mm when cut it through on material, because there’s a little bit of gap appear on cutting edge, like below.

 

some trouble of laser cutter


Solution:
In RDworks, you can use “offset polygon” tool to correct the error.
some trouble of laser cutter

some trouble of laser cutter


End.